Bus Profile Bending Technology

ModelG-CNC-A12T
Power, X-axis12T
Torque1700N.m, 3 individually driven rollers
Infinitely variable speed1-20rpm
Y-axisResolution and positioning 0.01mm
Down Rollers dist.adjustable: 180-390 mm
Tool holder ⌀50mm
Rollers high180mm
Travel150mm ( controlled Y-axis)
Hydraulic drive2.2KW (Servomotor)
Roller drive3KW (electrical power)
Power Supply380V, 50HZ, 16.3A
Weight1000KG
L*W*H1731*674*1670mm
201910121330442310460
201910121331314630270
201910121332118845052
201910121332357134438
201910121332049140612
201910121331395993556
201910121330442310460 201910121331314630270 201910121332118845052 201910121332357134438 201910121332049140612 201910121331395993556

Through the G Clef unique software, you can realize precise profile bending with variable curvature, work efficiency can be greatly improved, labor cost can be saved, the operation is simple, and very easy learning. Whether it is profile, pipe, square tube, G Clef not only sells the bending machine, but also provides the corresponding bending solutions for the customers. With G Clef bending solution and experience, the customer will be in the leading position in the bending peer! For our customer, you just need to bring us the problem, regarding to the distortion, wrapping, collapse, twist, curve/bow, bulge, asymmetry, S curve, elliptical and spline which do harm to the efficiency, time and cost, we will provide a complete solution. Our creative solutions have already approved by some famous companies in automotive, escalator, aerospace, rail transit, conveyor, facade, doors and windows, roofing, lighting industries etc.

aerospace, automotive, railway transit, escalator, led lighting, doors and windows, furniture, facade construction, bathroom hardware, fitness equipment, decorative works etc.

100*100*3; Min. Radius recommended: T ( bending length)* 5

Remove the side ribs from the outside of the product tube and then bend and shape. Observe whether there is distortion on both ends of the product after molding. If the product is distorted, the side indicates that there is a problem with the current model. In the absence of ribs, the product is symmetrical and should not be distorted during molding. At this point, the simple mode should be repaired to achieve no distortion when there is no rib. Then try again if there is any distortion in the product when there is a reinforcement. If the twisted side indicates that the side ribs will cause distortion of the product during molding, the twisting amount will be compensated when the new mold is opened. If not twisted, this problem is not considered when opening the mold.

According to the theory of elastic-plasticity, deduces the expression of the relationship between the radius of curvature before and after roll forming and compensates the springback; Then based on the G Clef 3-axis profile bending machine, the coordinate control system for the roll bending motion of the profile was established, and the mathematical model between the roller bending forming radius and the roller feed rate in the 3thre process stages of roll bending, centering, pre-bending, continuous roll bending and unloading was solved. Furthermore, deduces the formulas for calculating the load on each roller and driving power of the driving roller in the molding process.

MACHINE RANGE AND SPECIFICATIONS

Cannot find required Table

LET’S WORK TOGETHER

LET’S WORK TOGETHER

We work as a single united team with market leading firms around the world and give our clients the highest quality advice possible.

We work as a single united team with market leading firms around the world and give our clients the highest quality advice possible.